Compared with PEX jaw crusher, PE jaw crusher is suitable for coarse crushing operations, while PEX jaw crusher is suitable for medium and fine crushing operations. We will give you the answer and explain the difference between the two.

Generally speaking, the inlet size of the PE jaw crusher is larger, and the outlet size is also larger. Taking the PE600×900 model as an example, the inlet size is 600 mm wide and 900 mm long, and the inlet particle size is suitable for 500 For materials below 160 mm, the outlet size is generally less than 160 mm; while the inlet size of the PEX jaw crusher is smaller, and the outlet size is also smaller. Taking the PEX250×1200 model as an example, the inlet size is 250 mm wide, 1200 mm long, the feed particle size is suitable for materials below 200 mm, and the outlet size is generally below 30 to 50 mm.

1. The PE jaw crusher has a deep crushing cavity, strong continuous operation capability, and large production and processing capacity. Compared with the PEX jaw crusher, its production capacity is much higher than the latter. At the same time, due to load reasons, the motor is larger than the latter and consumes more power.

2. The PEX jaw crusher works relatively stably, the vibration force is very small, and the basic weight of the machine equipment is small. The weight of PE jaw crusher equipment is usually several times that of PEX jaw crusher equipment, and the foundation of PE jaw crusher needs to be larger and stronger than that of PEX jaw crusher.

3. The PEX jaw crusher is easy to start because of its small motor and light load. Since the PE jaw crusher has a large motor and heavy load, it needs a voltage-reducing starting electrical cabinet to start.

4. Compared with PE jaw crusher, PEX jaw crusher is more convenient to install, maintain and inspect.